Aubert Mirecourt French bridges are renowned. They are carved from select European maple, and treated, to make the wood harder and more consistent. Price differences indicate the quality and age of the maple used. All bridges should be adjusted by a professional luthier. Fitted options still require final adjustment.
Fitted: 4/4, 3/4, 1/2, 1/4, 1/8, 1/16
Not Fitted: 4/4, 3/4, 1/2, 1/4, 1/8, 1/16.
Mirecourt, Not Fitted: 4/4 (Std or Low Heart)
Mirecourt, "De Luxe", Not Fitted: 4/4 (Std or Low Heart)
Mirecourt, "Luxe", Not Fitted: 4/4 (Std or Low Heart)
Fitted: 46mm (standard)
Not Fitted: 46mm (standard)
Mirecourt, Not Fitted: 46mm, 48mm, 50mm, 52mm.
Mirecourt, Deluxe, Not Fitted: 46mm, 52mm.
Fitted: 4/4, 3/4, 1/2, 1/4.
Not Fitted: 4/4, 3/4, 1/2, 1/4.
Mirecourt, Not Fitted, 88mm, 90mm, 92mm, 94mm.
Mirecourt, Belgian, Not Fitted: 88mm, 90mm, 92mm,.
Mirecourt Deluxe, 88 mm, 90mm, 92mm, 94mm.
Mirecourt Deluxe, Belgian: 90mm.
Not Fitted: 3/4 (standard), 1/2, 1/4, 1/8.
Adjustable Height (with wheels) available in the Teller brand, and are listed on this site, under "Bridges, Teller/Bausch".
Ibex brass finger planes are great for plate graduation, or a multitude of other jobs. Blade secures with knurled nut thumb screw. Standard slightly rounded blade included. Toothed blade also available.
Available sizes of the Curved Sole Plane:
8mm x 25mm
10mm x 30mm
12mm x 36mm
18mm x 47mm
Toothed or rounded blade replacement sizes: 8mm, 10mm, 12mm, or 18mm
Hand forged steel clamps, with new unique strutted design, of high stability and low weight give well defined pressure. High pitch rods for fast closing action. Freely mobile brass swivels on ball bearings. All parts galvanized are made of corrosion free material.
German made gluing clamps for violin or viola. The pads of these clamps go over the edge of the instrument, directly over the rib, which eliminates possible chipping of varnish or damage to the edge. The materials used are glue repelling, non-aging and elastic to avoid leaving pressure marks.
Clamps colored to designate placement on instrument: Red = Corner Yellow = Inner Bouts Blue = Outer Bouts
A peg shaper for either violin, viola, or cello. You can cut fast giving a clean, smooth surface even on delicate wood. Blades have two edges for extended life. Padded with soft plastic, these professional tools will not scratch hands or slip on the bench. Please specify instrument and size needed.
German peg hole and endpin hole reamers. Made of high speed steel, the cutting edge is abrasion resistant and built for continuous use. Three cutting edges only, best for achieving perfectly rounded holes.
Peg Hole Reamers:
Violin and Viola: standard #R201, or spriral #R201S (1:30 taper)
Small violin 1/2 - 1/16: standard #R200 (1:30 taper)
Cello: standard #R202, or spiral #R202S (1:25 taper)
Ebony Nuts and Saddles: Finished and Not Finished Finished options have plenty of extra material for final adjustment.
Violin 4/4-3/4: Finished or Not Finished 3/4 Violin: Finished 1/2 Violin: Finished 1/4 Violin: Finished 1/8 Violin: Finished Viola: Finished or Not Finished Cello 4/4-3/4: Finished or Not Finished Bass: Finished or Not Finished
Violin 4/4-3/4: Finished or Not Finished Viola: Finished or Not Finished Cello 4/4-3/4: Finished or Not Finished Bass: Finished or Not Finished