Aubert Mirecourt French bridges are renowned. They are carved from select European maple, and treated, to make the wood harder and more consistent. Price differences indicate the quality and age of the maple used. All bridges should be adjusted by a professional luthier. Fitted options still require final adjustment.
Fitted: 4/4, 3/4, 1/2, 1/4, 1/8, 1/16
Not Fitted: 4/4, 3/4, 1/2, 1/4, 1/8, 1/16.
Mirecourt, Not Fitted: 4/4 (Std or Low Heart)
Mirecourt, "De Luxe", Not Fitted: 4/4 (Std or Low Heart)
Mirecourt, "Luxe", Not Fitted: 4/4 (Std or Low Heart)
Fitted: 46mm (standard)
Not Fitted: 46mm (standard)
Mirecourt, Not Fitted: 46mm, 48mm, 50mm, 52mm.
Mirecourt, Deluxe, Not Fitted: 46mm, 52mm.
Fitted: 4/4, 3/4, 1/2, 1/4.
Not Fitted: 4/4, 3/4, 1/2, 1/4.
Mirecourt, Not Fitted, 88mm, 90mm, 92mm, 94mm.
Mirecourt, Belgian, Not Fitted: 88mm, 90mm, 92mm,.
Mirecourt Deluxe, 88 mm, 90mm, 92mm, 94mm.
Mirecourt Deluxe, Belgian: 90mm.
Not Fitted: 3/4 (standard), 1/2, 1/4, 1/8.
Adjustable Height (with wheels) available in the Teller brand, and are listed on this site, under "Bridges, Teller/Bausch".
Ibex brass finger planes are great for plate graduation, or a multitude of other jobs. Blade secures with knurled nut thumb screw. Standard slightly rounded blade included. Toothed blade also available.
Available sizes of the Curved Sole Plane:
8mm x 25mm
10mm x 30mm
12mm x 36mm
18mm x 47mm
Toothed or rounded blade replacement sizes: 8mm, 10mm, 12mm, or 18mm
Endpin Rib Clamp: For re-gluing loose ribs to the lower block without opening the
instrument. After the pivot is inserted through the end pin hole, the
rods turns by gravity into the cross position. Sizes: Violin/Viola. Made in Germany.
Rib Corner Clamp: For re-gluing rib corners. Attach to rib corner area and apply pressure to each rib with perpendicular spindles. Sizes: Cello. Made in Germany.
Fingerboard Strap Clamp: Made of high strength plastic. Made in USA.
Hand forged steel clamps, with new unique strutted design, of high stability and low weight give well defined pressure. High pitch rods for fast closing action. Freely mobile brass swivels on ball bearings. All parts galvanized are made of corrosion free material.
German made gluing clamps for violin or viola. The pads of these clamps go over the edge of the instrument, directly over the rib, which eliminates possible chipping of varnish or damage to the edge. The materials used are glue repelling, non-aging and elastic to avoid leaving pressure marks.
Clamps colored to designate placement on instrument: Red = Corner Yellow = Inner Bouts Blue = Outer Bouts
The combination of aluminum and brass greatly reduces the weight of the clamp and increases its flexibility for use in sensitive areas. Rubber padded plates of the leveling screws as well as rubber jaws reduce the risk of damage to instrument. European origin ensures durability, precise and flawless action.
A peg shaper for either violin, viola, or cello. You can cut fast giving a clean, smooth surface even on delicate wood. Blades have two edges for extended life. Padded with soft plastic, these professional tools will not scratch hands or slip on the bench. Please specify instrument and size needed.