Bridge Foot Fitting Jig: Used to fit the feet of a bridge quickly and perfectly (USA). Sizes: Violin/Viola; Cello. Cello Bridge Foot Expander: To simulate string tension when fitting cello bridges for more accurate fitting of feet. 2 Brands: All brass (Germany);Brass and aluminum (USA).
Bridge Marker: Machined aluminum gauge, marks string notches on all bridges from 4/4 cello, to 1/8 violin (USA).
String Lifters: Measures needed bridge height quickly and safely, without removing strings (Germany). Sizes: Violin/Viola; Cello; Bass.
Herdim peg shapers. You can cut fast, leaving a clean, smooth surface even on delicate wood. Blades have two edges which means double lifetime. Padded with soft plastic, these professional tools will not scratch hands or slip on the bench. Sizes: Vln/Vla; Vln/Vla 1/2-1/16; Cello; Cello 1/2-1/8. Replacement blades available. Made in Germany.
Juzek Peg shapers. These shapers offer an adjustable taper. Sizes: Vln/Vla; Cello. Replacement blades available. Made in USA.
Wittner peg shaper kit for Wittner-Ultra pegs or traditional wooden pegs (vln/vla).
Interchangeable bushing: Diameters, 7mm, 7.8mm, 8.6mm, 9.4mm. Taper for
each diameter: 1:20, 1:25, 1:30. Includes 12 interchangeable bushings,
peg handle for shaping and exchanging bushings, replacement blade,
adjuster right with spare, adjuster left with spare,and allen wrench.
Additional replacement blades available. Made in Germany.
Patching Clamp: Lightweight, machined aluminum clamp for gluing cleats on violin or viola. Tightening screws on top and bottom swivel. 20mm mouth x 105mm throat. Made in USA.
Three-way Clamp: Lightweight machined aluminum clamp for re-gluing top or back on violin or viola. Swiveling tightening screws on top and bottom. Side screw used
to properly position instrument to prevent bulging ribs. Made in USA.
Edge CrackClamp: Draws together top or back crack, at edge, for gluing. Made in USA.
Endpin Rib Clamp: For re-gluing loose ribs to the lower block without opening the
instrument. After the pivot is inserted through the end pin hole, the
rods turns by gravity into the cross position. Sizes: Violin/Viola; Cello. Made in Germany.
Rib Corner Clamp: For re-gluing rib corners. Attach to rib corner area and apply pressure to each rib with perpendicular spindles. Sizes: Violin/Viola; Cello. Made in Germany.
Fingerboard Strap Clamp: Made of high strength plastic. Made in USA.