Hand forged steel clamps of high stability and low weight give well defined pressure. High pitch rods for fast closing action. Freely mobile brass swivels on ball bearings. All parts galvanized or made of corrosion free material. Available in following sizes: Throat measurement first, 40x30 mm, 85x40 mm, 135x45 mm, 160x40 mm,
German made gluing clamps. The pads of these clamps go over the edge of the instrument, directly over the rib, which eliminates possible chipping of varnish or damage to the edge. The materials used are glue repelling, non-aging and elastic to avoid leaving pressure marks.
Clamps colored to designate placement on instrument: Red = Corner Yellow = Inner Bouts Blue = Outer Bouts
German peg hole and endpin reamers. Made of high speed steel, the cutting edge is abrasion resistant even under excessive use. Three cutting edges only, best for achieving perfectly rounded holes. Vln/Vla taper 1/30; Cello peg hole taper 1/25; Cello and Bass endpin tapers 1/17.
Cello endpin, 27.5mm at widest diameter.
Bass endpin, 36mm at widest diameter.
The spiral version helps to reduce chatter, and has polished rosewood handle.
Standard reamer has polished boxwood handle.
Available sizes: Violin/Viola, standard or spiral. Small violin, standard or spiral. Cello peg hole, standard or spiral. Cello endpin, standard. Bass endpin, standard.